Database of Steel and Alloy (Marochnik)

  Home     Steel and Alloy     Search     Equivalent Grades     GOST Standards     Grading     Contacts  
   
YOU HERE:   Steel and Alloy   ->   Copper

Characteristics for grade     MN0.6   ( МН0.6 )



      Grade :   MN0.6   ( МН0.6 ) (   СплавТП   )
      Classification :   Copper-nickel alloys
      Equivalent grades:     Is absent



Chemical composition in % for grade   MN0.6   ( МН0.6 )
Ni+Co Fe C Si S P Cu As PbSb Bi Impurity
0.57 - 0.63max   0.01max   0.002max   0.002max   0.005max   0.00299.27 - 99.43max   0.002max   0.005max   0.002max   0.002 all 0.1
Comment: Cu is a basis; the percentage of Cu is given approximately.


Mechanical properties under Т=20oС for grade   MN0.6   ( МН0.6 )
Assortment Dimension Direct. sв sT d5 y KCU Heat treatment
- mm - MPa MPa % % kJ / m2 -
soft     240-300  32-40   
hard     380-450  3-6   


    Brinell hardness for     MN0.6   ( МН0.6 )   ,     soft HB 10 -1 = 50 - 60   MPa


Technological properties of the material   MN0.6   ( МН0.6 ) .
        Melting temperature : 1084   °C
        Forging temperature : 800 - 930   °C
        Annealing temperature : 500 - 600   °C


Physical properties for grade   MN0.6   ( МН0.6 )
T E 10- 5 a 10 6 l r C R 10 9
Grade MPa 1/Grade Watt/(m·Grade) kg/m3 J/(kg·Grade) Ohm·m
20 1.2     8960   310



Types of delivery of grade   MN0.6   ( МН0.6 )
B51 - Non-ferrous metals, including rare metals, and their alloys
B74 - Wire made of non-ferrous metals and their alloys


Specification :
Mechanical properties :
sв - Tensile strength , [MPa]
sT - Yield stress, [MPa]
d5 - Specific elongation at fracture , [ % ]
y - Reduction of area , [ % ]
KCU - Impact strength , [ kJ / m2]
HB - Brinell hardness , [MPa]

Physical properties :
T - Test temperature , [Grade]
E - Young modulus , [MPa]
a - Coefficient of linear expansion (range 20o - T ) , [1/Grade]
l - Termal (heat) condition coefficient , [Watt/(m·Grade)]
r - Density , [kg/m3]
C - Specific heat ( range 20o - T ), [J/(kg·Grade)]
R - Electrical resistance , [Ohm·m]

  MN0.6   ( МН0.6 ) - Copper-nickel alloys: chemical composition, mechanical and physical properties, hardness
Database of steels and alloys (Marochnik) contains information about chemical composition and properties more then 3000 steels and alloys

    ©   2003 - 2024         Database of Steel and Alloy (russian title is the Marochnik)
Administration of the Marochnik is not responsible for the content's use.
Рейтинг@Mail.ru