Database of Steel and Alloy (Marochnik)

  Home     Steel and Alloy     Search     Equivalent Grades     GOST Standards     Grading     Contacts  
   
YOU HERE:   Steel and Alloy   ->   Aluminium alloy

Characteristics for grade     АV   ( АВ )



      Grade :   АV   ( АВ ) (   1340   )
      Classification :   Aluminium wrought alloys
      Equivalent grades:   Go here



Chemical composition in % for grade   АV   ( АВ )
Fe Si Mn Cr TiAl Cu Mg Zn Impurity
max   0.50.5 - 1.20.15 - 0.35max   0.25max   0.1595.95 - 98.80.1 - 0.50.45 - 0.9max   0.2other, each 0.05; all 0.1
Comment: Al is a basis; the percentage of Al is given approximately.


Mechanical properties under Т=20oС for grade   АV   ( АВ )
Assortment Dimension Direct. sв sT d5 y KCU Heat treatment
- mm - MPa MPa % % kJ / m2 -
Pipe, GOST 18482-79     310 225 8   Quenching and artificial aging
Pipe, GOST 18482-79     210 110 14   Hardening and ageing
Bar, GOST 51834-2001     295-315225 12-14  Quenching and artificial aging
Bar, GOST 51834-2001     335 245 8   Quenching and artificial aging
Bar, GOST 21488-97     295 225 12   Quenching and artificial aging
Bar, GOST 21488-97     175 100 14   Hardening and ageing
Band annealed , GOST 13726-97     145   15    
Profile, GOST 8617-81     176   14    
Profile, GOST 8617-81 to 50   294 225 10   Quenching and artificial aging
Plate , GOST 17232-99     275-295  6-7  Quenching and artificial aging
Plate , GOST 17232-99     165-175  10-14  Hardening and ageing


    Brinell hardness for     АV   ( АВ )   ,       HB 10 -1 = 85   MPa
    Brinell hardness for     АV   ( АВ )   (quenching) ,       HB 10 -1 = 65   MPa
    Brinell hardness for     АV   ( АВ )   ,     annealed HB 10 -1 = 30   MPa


Physical properties for grade   АV   ( АВ )
T E 10- 5 a 10 6 l r C R 10 9
Grade MPa 1/Grade Watt/(m·Grade) kg/m3 J/(kg·Grade) Ohm·m
20 0.71     2700   37
100   23.5 180   797  


Equivalent steels for grade     АV   ( АВ )
Warning! Indicated both exact and nearest equivalents.
USAJapan
-JIS
AA6151
6151



Types of delivery of grade   АV   ( АВ )
B52 - Graded and shaped rolling
B53 - Sheets and Strips
В54 - Ribbons
B55 - Bars
B64 - Pipes of non-ferrous metals and alloys


Specification :
Mechanical properties :
sв - Tensile strength , [MPa]
sT - Yield stress, [MPa]
d5 - Specific elongation at fracture , [ % ]
y - Reduction of area , [ % ]
KCU - Impact strength , [ kJ / m2]
HB - Brinell hardness , [MPa]

Physical properties :
T - Test temperature , [Grade]
E - Young modulus , [MPa]
a - Coefficient of linear expansion (range 20o - T ) , [1/Grade]
l - Termal (heat) condition coefficient , [Watt/(m·Grade)]
r - Density , [kg/m3]
C - Specific heat ( range 20o - T ), [J/(kg·Grade)]
R - Electrical resistance , [Ohm·m]

  АV   ( АВ ) - Aluminium wrought alloys: chemical composition, mechanical and physical properties, hardness
Database of steels and alloys (Marochnik) contains information about chemical composition and properties more then 3000 steels and alloys

    ©   2003 - 2024         Database of Steel and Alloy (russian title is the Marochnik)
Administration of the Marochnik is not responsible for the content's use.
Рейтинг@Mail.ru