Database of Steel and Alloy (Marochnik)

  Home     Steel and Alloy     Search     Equivalent Grades     GOST Standards     Grading     Contacts  
   
YOU HERE:   Steel and Alloy   ->   Aluminium alloy

Characteristics for grade     V124   ( В124 )



      Grade :     V124   ( В124 )
      Classification :   Aluminium casting alloys
      Equivalent grades:     Is absent



Chemical composition in % for grade   V124   ( В124 )
Fe Si Mn TiAl Cu B Mg Impurity
max   0.38 - 110.1 - 0.30.1 - 0.383.65 - 88.643 - 40.01 - 0.10.15 - 0.35 all 0.3
Comment: Al is a basis; the percentage of Al is given approximately.


Mechanical properties under Т=20oС for grade   V124   ( В124 )
Assortment Dimension Direct. sв sT d5 y KCU Heat treatment
- mm - MPa MPa % % kJ / m2 -
cast in a metal mould     400   2    
sand (mould) casting     340   0.5    


    Brinell hardness for     V124   ( В124 )   ,       HB 10 -1 = 110 - 120   MPa


Technological properties of the material   V124   ( В124 ) .
        Linear shrinkage : 1.1   %




Specification :
Mechanical properties :
sв - Tensile strength , [MPa]
sT - Yield stress, [MPa]
d5 - Specific elongation at fracture , [ % ]
y - Reduction of area , [ % ]
KCU - Impact strength , [ kJ / m2]
HB - Brinell hardness , [MPa]

Physical properties :
T - Test temperature , [Grade]
E - Young modulus , [MPa]
a - Coefficient of linear expansion (range 20o - T ) , [1/Grade]
l - Termal (heat) condition coefficient , [Watt/(m·Grade)]
r - Density , [kg/m3]
C - Specific heat ( range 20o - T ), [J/(kg·Grade)]
R - Electrical resistance , [Ohm·m]

  V124   ( В124 ) - Aluminium casting alloys: chemical composition, mechanical and physical properties, hardness
Database of steels and alloys (Marochnik) contains information about chemical composition and properties more then 3000 steels and alloys

    ©   2003 - 2024         Database of Steel and Alloy (russian title is the Marochnik)
Administration of the Marochnik is not responsible for the content's use.
Рейтинг@Mail.ru