Database of Steel and Alloy (Marochnik)

  Home     Steel and Alloy     Search     Equivalent Grades     GOST Standards     Grading     Contacts  
   
YOU HERE:   Steel and Alloy   ->   High-temperature or heat-resistant steel and alloy

Characteristics for grade     08KH15N24V4TR   ( 08Х15Н24В4ТР )



      Grade :   08KH15N24V4TR   ( 08Х15Н24В4ТР ) (   Х15Н24В4Т     ЭП164   )
      Classification :   High alloy high-temperature steel
      Equivalent grades:     Is absent



Chemical composition in % for grade   08KH15N24V4TR   ( 08Х15Н24В4ТР )
Fe C Si Mn Ni S P Cr Ce W Ti B
50.435 - 58.1max   0.08max   0.60.5 - 122 - 25max   0.02max   0.03514 - 16max   0.0254 - 51.4 - 1.8max   0.005


Mechanical properties under Т=20oС for grade   08KH15N24V4TR   ( 08Х15Н24В4ТР )
Assortment Dimension Direct. sв sT d5 y KCU Heat treatment
- mm - MPa MPa % % kJ / m2 -
Bar   longitudinal 750 450 18 35800Guenching 1130 - 1150oC, 2h,Cooling air, Ageing 730 - 750oC, 16h,Cooling air,
Bar   longitudinal 750 500 20 301200Drawing 700oC, 16h,Cooling air,


Technological properties for grade   08KH15N24V4TR   ( 08Х15Н24В4ТР )
  Weldability: hard weldability.


Physical properties for grade   08KH15N24V4TR   ( 08Х15Н24В4ТР )
T E 10- 5 a 10 6 l r C R 10 9
Grade MPa 1/Grade Watt/(m·Grade) kg/m3 J/(kg·Grade) Ohm·m
20 2.23   12.2 8230    
100 2.15 14.5        
200 2.09 15.5        
300 2 16.3        
400 1.91 16.8        
500 1.82 17.2        
600   17.4        
650 1.69 17.5        
700 1.65 17.8        
750 1.61 17.9        
800 1.56          
T E 10- 5 a 10 6 l r C R 10 9



Types of delivery of grade   08KH15N24V4TR   ( 08Х15Н24В4ТР )
В22 - Graded and shaped rolling
B23 - Sheets and Strips
В32 - Graded and shaped rolling
B33 - Sheets and Strips


Specification :
Mechanical properties :
sв - Tensile strength , [MPa]
sT - Yield stress, [MPa]
d5 - Specific elongation at fracture , [ % ]
y - Reduction of area , [ % ]
KCU - Impact strength , [ kJ / m2]
HB - Brinell hardness , [MPa]

Physical properties :
T - Test temperature , [Grade]
E - Young modulus , [MPa]
a - Coefficient of linear expansion (range 20o - T ) , [1/Grade]
l - Termal (heat) condition coefficient , [Watt/(m·Grade)]
r - Density , [kg/m3]
C - Specific heat ( range 20o - T ), [J/(kg·Grade)]
R - Electrical resistance , [Ohm·m]

Weldability :
without limitations - welding is done without heating and subsequent heat treeting
limited weldability - welding is possible under heating up to 100-120 grade and subsequent heat treeting
hard weldability - obtaining the quality welding needs the additional operations:heating up to 200-300 grade; the heat treeting ia annealing

  08KH15N24V4TR   ( 08Х15Н24В4ТР ) - High alloy high-temperature steel: chemical composition, mechanical and physical properties, hardness
Database of steels and alloys (Marochnik) contains information about chemical composition and properties more then 3000 steels and alloys

    ©   2003 - 2024         Database of Steel and Alloy (russian title is the Marochnik)
Administration of the Marochnik is not responsible for the content's use.
Рейтинг@Mail.ru