Database of Steel and Alloy (Marochnik)

  Home     Steel and Alloy     Search     Equivalent Grades     GOST Standards     Grading     Contacts  
   
YOU HERE:   Steel and Alloy   ->   Tool steel

Characteristics for grade     90KHMF   ( 90ХМФ )



      Grade :     90KHMF   ( 90ХМФ )
      Classification :   Tool steel for roller
      Equivalent grades:     Is absent



Chemical composition in % for grade   90KHMF   ( 90ХМФ )
C Si Mn Ni S P Cr Mo V
0.8 - 0.90.2 - 0.40.2 - 0.7max   0.3max   0.04max   0.041.4 - 1.70.2 - 0.30.1 - 0.2


Technological properties for grade   90KHMF   ( 90ХМФ )
  Weldability: is not used.
 Flakes : predisposed
Temper brittleness: not predisposed




Specification :
Mechanical properties :
sв - Tensile strength , [MPa]
sT - Yield stress, [MPa]
d5 - Specific elongation at fracture , [ % ]
y - Reduction of area , [ % ]
KCU - Impact strength , [ kJ / m2]
HB - Brinell hardness , [MPa]

Physical properties :
T - Test temperature , [Grade]
E - Young modulus , [MPa]
a - Coefficient of linear expansion (range 20o - T ) , [1/Grade]
l - Termal (heat) condition coefficient , [Watt/(m·Grade)]
r - Density , [kg/m3]
C - Specific heat ( range 20o - T ), [J/(kg·Grade)]
R - Electrical resistance , [Ohm·m]

Weldability :
without limitations - welding is done without heating and subsequent heat treeting
limited weldability - welding is possible under heating up to 100-120 grade and subsequent heat treeting
hard weldability - obtaining the quality welding needs the additional operations:heating up to 200-300 grade; the heat treeting ia annealing

  90KHMF   ( 90ХМФ ) - Tool steel for roller: chemical composition, mechanical and physical properties, hardness
Database of steels and alloys (Marochnik) contains information about chemical composition and properties more then 3000 steels and alloys

    ©   2003 - 2024         Database of Steel and Alloy (russian title is the Marochnik)
Administration of the Marochnik is not responsible for the content's use.
Рейтинг@Mail.ru