| Grade : | KH ( Х ) |
| Classification : | Alloy tool steel |
| Equivalent grades: | Go here |
Chemical composition in % for grade KH ( Х )
| C | Si | Mn | Ni | S | P | Cr | Mo | W | V | Ti | Cu |
| 0.95 - 1.1 | 0.1 - 0.4 | 0.15 - 0.45 | max 0.4 | max 0.03 | max 0.03 | 1.3 - 1.65 | max 0.2 | max 0.2 | max 0.15 | max 0.03 | max 0.3 |
Temperature of critical points for grade KH ( Х ).
| Ac1 = 745 , Ar1 = 700 , Mn = 240 |
| Brinell hardness for KH ( Х ) (annealing) , GOST 5950-2000 | HB 10 -1 = 229 MPa |
Equivalent steels for grade KH ( Х )
| USA | Germany | Japan | France | England | European | Italy | Spain | China | Sweden | Bulgaria | Hungary | Poland | Austria | South Korea | |||||||||||||||||||||||
| - | DIN,WNr | JIS | AFNOR | BS | EN | UNI | UNE | GB | SS | BDS | MSZ | PN | ONORM | KS | |||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Types of delivery of grade KH ( Х )
| В32 - Graded and shaped rolling |
Specification :
| Mechanical properties : | |
| sв | - Tensile strength , [MPa] |
| sT | - Yield stress, [MPa] |
| d5 | - Specific elongation at fracture , [ % ] |
| y | - Reduction of area , [ % ] |
| KCU | - Impact strength , [ kJ / m2] |
| HB | - Brinell hardness , [MPa] |
Physical properties : | |
| T | - Test temperature , [Grade] |
| E | - Young modulus , [MPa] |
| a | - Coefficient of linear expansion (range 20o - T ) , [1/Grade] |
| l | - Termal (heat) condition coefficient , [Watt/(m·Grade)] |
| r | - Density , [kg/m3] |
| C | - Specific heat ( range 20o - T ), [J/(kg·Grade)] |
| R | - Electrical resistance , [Ohm·m] |
KH ( Х ) - Alloy tool steel: chemical composition, mechanical and physical properties, hardness
Database of steels and alloys (Marochnik) contains information about chemical composition and properties more then 3000 steels and alloys
| © 2003 - 2024 Database of Steel and Alloy (russian title is the Marochnik)
Administration of the Marochnik is not responsible for the content's use. |